HPLC Columns
Waters Corp Waters Column, Resolve C8 Radial-Pak, 10 μm, 8 mm X 100 mm
The non-endcapped Resolve packings differ significantly from other packing materials. This difference in chromatographic behavior is most commonly observed with polar compounds, which typically exhibit greater retention.
- Chemistry: C8
- Separation mode: Reversed phase
- Particle substrate: Silica
- pH range: 2 to 8
- Maximum pressure: 6000 psi (415 Bar)
- Endcapped: No
- Silanol activity: High
- Particle shape: Spherical
- Particle size: 10 μm
- Pore size: 90 Å
- Format: Radial-Pak column
- Surface area: 200
- System: HPLC
- USP classification: L7
- Inner diameter: 8 mm
- Length: 100 mm
- Carbon load: 5 %
- Units per package: 1 pk
Waters Corporation XTerra Shield RP8 Column, 3.5 μm, 2.1 x 100 mm
This general-purpose, hybrid-based, reversed-phase C8 column employs embedded polar group technology, enhancing peak shape for highly basic compounds. It offers superior pH stability over silica-based columns and pioneered hybrid particle stationary phases, combining efficiency, mechanical strength, and broad pH range.
- Embedded polar group technology improves peak shape for highly basic compounds.
- Superior pH stability compared to silica-based columns.
- Hybrid particle technology combines high efficiency with expanded pH range.
- Wide pH range of 2–12 for versatile separations.
- High mechanical strength for a robust and durable material.
- Excellent water wettability, even in 100% aqueous mobile phases.
Waters Corp Spherisorb C8 Column, 80Å, 5 µm, 1 mm X 100 mm, 1/pk
Spherisorb C8 columns are general purpose, silica-based reversed-phase columns that contain an Octyl ligand. These USP L7 columns are used when you require a less retentive sorbent compared to the Spheriorb ODS columns.
Advanced Materials Technology HALO 160 ES-C18 2.7 4.6
HALO BIOCLASS ES-C18 Peptide columns made with innovative Fused-Core particle technology are ideal for both ultrafast and ultrahigh resolution separations of peptides and polypeptides up to 20 kDa. HALO peptide columns offer comparable peak capacity to sub-2 μm non-core columns at 40–50% back pressure (2.7 μm), and 20% higher peak capacity than sub-2 μm non-core columns at comparable back pressure (2 μm). HALO 160 Å peptide columns are optimized for high performance in HPLC, UHPLC, and LCMS peptide applications.
Waters Corp Waters XSelect HSS Cyano Method Validation Kit, 100 Å, 2.5 μm, 4.6 mm X 100 mm
This method validation kit consists of three batches of XSelect HSS Cyano columns packed with three different batches of sorbent.
- Cyano (CN) chemistry
- Reversed phase separation mode
- Silica particle substrate
- pH range of 2 to 8
- Maximum pressure of 10000 psi (690 bar)
- High silanol activity
- Spherical particle shape
- Particle size of 2.5 μm
- Parker-style endfitting type
- Pore size of 100 Å
- Surface area of 230
- Compatible with UPLC and UHPLC systems
- HSS particle technology
- USP classification L10
- Inner diameter of 4.6 mm
- Length of 100 mm
- Carbon load of 5%
- Units per package: 3
Advanced Materials Technology HALO 160 A ES-C18 2.7 1.5
HALO BIOCLASS ES-C18 Peptide columns made with innovative Fused-Core particle technology are ideal for both ultrafast and ultrahigh resolution separations of peptides and polypeptides up to 20 kDa. HALO peptide columns offer comparable peak capacity to sub-2 μm non-core columns at 40–50% back pressure (2.7 μm), and 20% higher peak capacity than sub-2 μm non-core columns at comparable back pressure (2 μm). HALO 160 Å peptide columns are optimized for high performance in HPLC, UHPLC, and LCMS peptide applications.
Waters Corp Waters ACQUITY UPLC CSH Phenyl-Hexyl Column, 1.7 μm Particle, 130 Å Pore, 3.0 × 30 mm
ACQUITY UPLC CSH Phenyl-Hexyl Columns are designed to provide superior peak shape for basic analytes when used with formic acid or other low-ionic-strength, acidic mobile phases.
- Provides superior peak shape for basic analytes.
- Achieved through a controlled, low-level, positive surface charge.
- Bonded to ethylene-bridged hybrid (BEH) particles.
- Eliminates the need for ion-pairing reagents.
- Rugged design.
Waters Corp Waters ACQUITY UPLC CSH Phenyl-Hexyl Column, 1.7 μm, 130 Å, 1.0 x 100 mm
ACQUITY UPLC CSH Columns are designed to provide superior peak shape for basic analytes, particularly when used with formic acid or other low-ionic-strength, acidic mobile phases. This performance is achieved because the columns utilize a controlled, low-level, positive surface charge bonded to ethylene-bridged hybrid (BEH) particles, eliminating the need for ion-pairing reagents.
- Particle size: 1.7 μm
- Pore size: 130 Å
- Column dimensions: 1.0 × 100 mm
- Pack quantity: 3 columns
- Ligand density: 2.3 μmol/m²
- Carbon load: 14%
- Endcapped: Yes
- USP class no.: L11
- pH range: 1–11
- Temperature limits: Low pH = 80 °C, high pH = 45 °C
- Surface area: 185 m²/g
Mac-Mod ProntoSIL C18 EPS, 120 Å, 5 µm, 4.6 x 100 mm HPLC Column
ProntoSIL HPLC columns produce great results, while at the same time being an economical column. Columns are packed in 400 bar HPLC hardware. There are several RPLC, HILIC, NPLC and Application Specific Columns with over 25 different bonded phases which are sure to solve your separation issues.
Sepax Technologies Inc Sepax HPLC Column PolyRP-500, 10 µm, 30 x 250 mm
GP-C8 phase is synthesized with monomeric and fully endcapped chemistry. The uniform octyl stationary phase allows high efficiency with lower hydrophobicity compared to ODS phase. GP-C8 phase is suitable for separating compounds with a wide range of hydrophobicity. It is highly recommended for separating the compounds which are too strongly retained on C18 phases.
Waters Corp WATERS CORPORATION XBridge BEH Shield RP18 OBD Prep Column, 130Å, 5 μm, 50 mm × 50 mm
The XBridge BEH Shield RP18 columns are designed to complement XBridge BEH C18 and C8 phases, offering a valuable tool for HPLC method development. These columns feature an embedded carbamate group in the bonded phase ligand, which provides alternate selectivity, particularly for phenolic compounds, when compared to traditional straight-chain alkyl columns.
- Alternate selectivity, especially for phenolic compounds
- Embedded carbamate group in the bonded phase ligand
- Complements C18 and C8 phases
- Embedded polar C18 providing different selectivity with improved peak shape for basic compounds
Sepax Technologies Inc Sepax HPLC Column PolyRP-1000, 10 µm, 30 x 150 mm
GP-C8 phase is synthesized with monomeric and fully endcapped chemistry. The uniform octyl stationary phase allows high efficiency with lower hydrophobicity compared to ODS phase. GP-C8 phase is suitable for separating compounds with a wide range of hydrophobicity. It is highly recommended for separating the compounds which are too strongly retained on C18 phases.
NANOMICRO TECHNOLOGIES INC ChromCore 120 C18 LC Analytical Column, 3 μm, 2.1 x 100 mm, Stainless Steel
ChromCore 120 C18 columns are based on monodispersed high-purity porous silica particles densely bonded with C18 and exhaustive end-capping for minimal undesired silanol activity They feasure high column efficiency excellent peak shape and good column-to-column reproducibility making them suitable for a broad range of analytes with low to high hydrophobicity
Waters Corp Waters Preparative Column, C18, 10 μm Particle, 100 Å Pore, 50 mm x 50 mm
Atlantis T3 columns are universal, silica-based, reversed-phase C18 columns designed to provide balanced retention of polar and hydrophobic molecules, making them ideal for developing separations of both polar and non-polar compounds.
- C18 chemistry for reversed phase separation.
- Silica, spherical particle substrate.
- pH range: 2 to 8.
- Temperature limit: 45 °C.
- Maximum pressure: 6000 psi (415 bar).
- T3 bonding technology, endcapped.
- Particle size: 10 μm.
- Pore size: 100 Å.
- OBD prep column: 50 mm ID x 50 mm L.
- Surface area: 330 m²/g.
- HPLC preparative, LC/MS, LC compatible.
- Enhanced polar compound retention.
- Superior stability under low pH conditions.
- Compatible with 100% aqueous mobile phase.
Waters Corp Waters Column, C6, Reversed Phase, 5 μm, 4.6 mm ID, 150 mm
Spherisorb C6 columns are general purpose, silica-based reversed-phase columns with a linear-hexyl ligand, ideal for applications requiring less retention or rapid reversed-phase separation.
- General-purpose, silica-based reversed-phase column.
- Contains a linear-hexyl ligand for less retention than ODS columns.
- Suitable for ion-pair work and rapid reversed-phase separations.
- Features Parker-style column end fittings and high-quality bonded phases.
- Durable and efficient for method optimization and solvent reduction.
- Dimensions: 4.6 mm ID × 150 mm length.
- Maximum pressure: 6000 psi (415 Bar); pH range: 2 to 8.
- Manufactured under cGMP, ISO 9002 certified, and FDA registered for quality assurance.